News&Cases

Home - News&Cases - Cases

75 Ton Flatbed Steel Ladle Rail Transfer Car For Steel Plant With Insulated Rails And Wheels

April 20, 2020

The steel ladle rail transfer car for steel plant is a patented product from Xinxiang Hundred Percent Electrical And Mechanical Co., Ltd. Different type and structure rail transfer car for ladle transfer are designed as per customers'  requirement.

The structure of this model is slightly different from that of ordinary electric flat cars. First of all, the minimum ladle height is 1m, and dangerous goods such as molten steel are installed inside. In order to reduce the center of gravity of the ladle as much as possible, the platform of the ladle car is mostly hollow. The ladle is placed in the depression of the table, and there is a beam on the table. The position of the ladle hanging hole can be placed on it to increase the bearing capacity. Secondly, in order to adapt to the harsh environment of the steel making furnace, the configuration of the motor, reducer and other accessories of the crane ladle car is higher than that of the ordinary ladle car, and two sets of drive systems are usually used. In this case, if one set of drive systems fails, you can Avoiding the condensation of molten steel in the ladle due to the stop of the flat car movement can reduce the loss of the enterprise. 

Technical Parameter of steel ladle transfer car:

1. Model: KPD

2. Capacity: 75 ton

3. Power: Low voltage rail power

4. Table Size: 5500*4000*880mm

5. Motor: Ac motor

6. Rail Type: P50 Steel Rail

7. Customized: Customized the table structure

8. Control Method: Hand Pendant + Wireless Remote Control

9. Warranty: 18 Months

75 Ton Flatbed Steel Ladle Rail Transfer Car For Steel Plant With Insulated Rails And Wheels