Vacuum Furnace Using Transfer Cart
Vacuum furnace using ferry transfer cart is made of three carts. The cart on the surface of the trench is used to transport the above two carts for along distance.
- OEM: Support
- Vulnerable Parts: Give as gifts
- Certificate: CE, SGS, ISO9001, SASO
- Warranty: 2 Years
- Port: Qingdao, Tianjin, Shanghai
Vacuum furnace using ferry transfer cart is made of three carts. The cart on the surface of the trench is used to transport the above two carts for along distance. The second cart above the ground cart is equipped with rails and operated by the ball screw which is connected with the rail in the vacuum furnace. The third layer is gear and rack driven. It can automatically connect with the skip car within the vacuum furnace, then pull the skip car out of vacuum furnace. In order to make the connection safe, stable and without impact,frequency changing device is used.
1. Support One-Stop Solution
2. Customized Solution On Request
3. Load Capacity reach to 1-1,500 tons can be customized on request.
4. Customized Power source
5. Safe bearing factor reach to 150%
6. All transfer cart with safety control system.
7. Stout steel frame.(adopt the box girder structure)
8. Free provide customized handling solution
9. Automated operation and transportation system are support
10. DC & AC motor supported
| Technical Parameter Of Vacuum Furnace using transfer cart | ||
| A Layer Of Transfer Crt | ||
| Model | KPT | Remark |
| QTY | 1 SET | |
| Application | Vacuum Furnace | |
| Load Capacity (T) | 50T | Custom Capacity over 1,500T |
| Table Size (mm) | 9100(L)*2100(W)*800(H) | Box Girder Structure |
| Rail Inner Gauge (mm) | 1435 | |
| Power Supply | Dragged Cable Power | The dragged chain can be added to protect the cable |
| Motor Power(KW) | 3 | |
| Motor | AC Motor | Frequency Charger Support |
| Running Speed(m/min) | 0-50 | |
| Wheel Dia.(mm) | 400 | Casted steel Material |
| Power | AC380V，50HZ | |
| Recommend Rail | P38 | |
| Color | Yellow | Customized Color |
| Operation Type | Hand Pendant + Remote Control | |
| The Second Car | ||
| Motor Power(KW) | 5.5 | |
| Running Speed(m/min) | 0-30 | |
| Running Distance(m) | 0.4 | |
| Wheel Dia.(mm) | 200 | |
| The Third Car | ||
| Motor Power(KW) | 4 | |
| Running Speed(m/min) | 0-30 | |
| Running Distance(m) | 6 | |
| Wheel Dia.(mm) | 80 | |
Please Feel free to give your inquiry in the form below. We will reply you in 24 hours
