5Ton Efficient RGV Rail Transfer Cart For Mold Factory
Our European customer ordered 2 sets of 5-ton RGV rail transfer carts for transporting molds. They plan to order again if this RGV rail transfer cart works well in the factory.
Project requirements:
The customer wants a guided transfer cart that can be used on rails, running on the flat ground of the factory, for transporting molds, and requires a size and weight that can withstand a weight of about 1000kg. The frequency of use is 12 times/day, with an average working time of 2 hours/time per day, and sufficient endurance is required. The operating distance is about 100-120 meters, requiring manual control mode, but can support automatic systems for further development.
Solution:
Based on the customer's factory situation and specific requirements, BEFANBY recommended a 5-ton RGV rail transfer cart to the customer. This RGV rail transporter has a load capacity of 5 tons and can fully meet the handling needs. The frame is a box beam structure frame, and the wheels are cast steel wheels, with stable performance and long operating time. In addition, this RGV rail transfer cart is also equipped with a remote control, which can manually control the forward, backward, and stop of the RGV rail transfer cart. This RGV rail transfer cart realizes the automatic material transportation operation according to the plan and instructions through PLC programming, performs fixed-point operation on the workshop assembly line, can communicate with other equipment and operate automatically without manual operation, greatly improving the handling efficiency of the production line.
Technical parameters:
Model: RGV
Loading capacity: 5 tons
Workbench size: 4200*1890*570mm
Running speed: 0-20m/min
Operation: Remote control
Contact us:
Welcome to contact us BEFANBY to provide you with handling solutions.
